Airport Extreme Xbox Live

• Airport Extreme Xbox Lives
• Airport Extreme Xbox Live Download
• Airport Extreme Xbox Live Cam
• Airport Extreme Xbox Live Price

Learn how to use AirPort Express, AirPort Extreme, and AirPort Time Capsule. Find all the topics, resources, and contact options you need for AirPort. Photo Courtesy of Gizmodo It was only a matter of time before someone found a work around to the Xbox 360, Airport Extreme compatibility issue. If you were one of the many who have been affected. Learn how to use AirPort Express, AirPort Extreme, and AirPort Time Capsule. Find all the topics, resources, and contact options you need for AirPort. 3 X1's on Apple Airport Extreme Router = never-ending NAT issues. I have been having NAT issues because i have 3 X1's in my house (live with 3 buddies) and the xbox's seem to be confusing each other when we are all online. I found info on how to set up an apple router for one X1 but nothing about multiple and my network knowledge is next to zero.

Find out if you have a NAT warning

1. Press the Guide button on your controller, go to Settings, and then select System Settings
2. Select Network Settings
3. Select Wired Network or your Wireless Network Name (if you are prompted to do so)
4. Select Test Xbox LIVE Connection

If you get a NAT error, try our methods below to attempt to resolve it.

Resolving NAT Issues

Preferred Method (Port Triggering)

Airport Extreme Xbox Lives

1. Visit the router's IP address
   To start, we must be on your computer. Then, open up your web browser (Internet Explorer, Firefox, Chrome, etc.) and clear out the address bar at the top. Now type in 192.168.1.1 and press Enter
   
2. Enter the Network password
   Next you should have a popup asking for a User Name and Password. The User Name is user and the Password is user. Then press OK.
   NOTE: If this User Name and Password doesn't work, you may also try the following:
   User Name: root Password: central
   User Name: root Password: 12345
   User Name: support Password: support
   
   
   
3. Enter the NAT -- Port Triggering Setup
   Once logged in to the Comtrend router, click on Advanced Setup on the left side of the screen. Then click on NAT and then click on Port Triggering. Finally click on Add to begin setting up the Port Triggering.
   
   
   
4. Here, we will select the correct User Interface (ex. PPPoE) and the bullet next to Custom application. In the box next to it, type in Xbox. Then enter the following information in to the table:
   
   
   

   Once this information is typed it, then click on Save/Apply.
   
5. Port Triggering should now be set up in your Comtrend. You may need to wait a couple of minutes for the Comtrend to save the settings and take affect. If you are still getting the NAT Error, please follow our Alternate Method (Port Forwarding)

Airport Extreme Xbox Live Download

1. Visit the router's IP address
   To start, we must be on your computer. Then, open up your web browser (Internet Explorer, Firefox, Chrome, etc.) and clear out the address bar at the top. Now type in 192.168.1.1 and press Enter
   
2. Enter the Network password
   Next you should have a popup asking for a User Name and Password. Skip the username and the default password should be admin, unless you have manually changed the password, and then press OK.
   
   
   
3. Once logged in to the Linksys router, click on Applications & Gaming at the top and then Port Triggering in the sub-menu.
   
4. On the Port Triggering page, enter the following values and then press Save Settings at the bottom:
   
   
   
5. Port Triggering should now be set up in your Linksys. You may need to wait a couple of minutes for the Linksys to save the settings and take affect. If you are still getting the NAT Error, please follow our Alternate Method (Port Forwarding)

To set up Port Forwarding, there are two main parts that must be done. The first part is setting up a static IP address on the Xbox 360, and the second is setting up the port forwarding on the router.
NOTE: By enabling a static IP address on your Xbox 360, you may run in to connectivity issues when attempting to connect to the internet at different locations. If you do run in to connectivity issues at other locations, you must turn off the static IP.

1. To start, we will need to turn on the Xbox. Then go to the Settings heading. From here you will need to move down and press A on System.
   
2. Next, choose Network Settings. Then you will want to select Wired Network.
   NOTE: The next steps are for the Wired Network settings. If you are connecting to a wireless network, then select Wireless Network instead. The steps for assigning a static IP for a wireless network should be somewhat similar.
   
   
   
3. Next, we will want to select Configure Network and press A. Here we want to select IP Settings by pressing A again. Then, we will want to select Manual to begin assigning a static IP.
   
4. Here you will need to fill out the IP Address, Subnet Mask, and Gateway information. Once all three settings have been entered, select Done and press A.
   NOTE: These settings may vary depending on the brand of your router, but the following settings are the default for both Comtrend and Linksys brands.
   
   • IP Address: 192.168.1.115
   • Subnet Mask: 255.255.255.0
   • Gateway: 192.168.1.1

   
   

5. Next we will want to select and change the DNS Settings to Manual as well. Depending on your ISP, these number will vary, but Nex-Tech's are:
   

   • Primary DNS Server: 24.225.5.2
   • Secondary DNS Server: 24.225.0.1

   Once these addresses are entered, select Done and press A.

6. Now we have successfully assigned a static IP address to your Xbox 360. Next we will need to set up the port forwarding inside your router. Please follow the steps below to configure your router.

To set up Port Forwarding, there are two main parts that must be done. The first part is setting up a static IP address on the Xbox 360, and the second is setting up the port forwarding on the router.
NOTE: By enabling a static IP address on your Xbox 360, you may run in to connectivity issues when attempting to connect to the internet at different locations. If you do run in to connectivity issues at other locations, you must turn off the static IP.

1. To start, we will need to turn on the Xbox. Then go to the Settings heading. From here you will need to move down and press A on System.
   
2. Next, choose Network Settings. Then you will want to select Wired Network.
   NOTE: The next steps are for the Wired Network settings. If you are connecting to a wireless network, then select Wireless Network instead. The steps for assigning a static IP for a wireless network should be somewhat similar.
   
   
   
3. Next, we will want to select Configure Network and press A. Here we want to select IP Settings by pressing A again. Then, we will want to select Manual to begin assigning a static IP.
   
4. Here you will need to fill out the IP Address, Subnet Mask, and Gateway information. Once all three settings have been entered, select Done and press A.
   NOTE: These settings may vary depending on the brand of your router, but the following settings are the default for both Comtrend and Linksys brands.
   
   • IP Address: 192.168.1.115
   • Subnet Mask: 255.255.255.0
   • Gateway: 192.168.1.1

   
   

5. Next we will want to select and change the DNS Settings to Manual as well. Depending on your ISP, these number will vary, but Nex-Tech's are:
   

   • Primary DNS Server: 24.225.5.2
   • Secondary DNS Server: 24.225.0.1

   Once these addresses are entered, select Done and press A.

6. Now we have successfully assigned a static IP address to your Xbox 360. Next we will need to set up the port forwarding inside your router. Please follow the steps below to configure your router.

1. Visit the router's IP address
   To start, we must be on your computer. Then, open up your web browser (Internet Explorer, Firefox, Chrome, etc.) and clear out the address bar at the top. Now type in 192.168.1.1 and press Enter
   
2. Enter the Network password
   Next you should have a popup asking for a User Name and Password. The User Name is root and the Password is central. Then press OK.
   NOTE: If this User Name and Password doesn't work, you may also try the following:
   User Name: root Password: 12345
   User Name: support Password: support
   
   
   
3. Once logged in to the router, click on Advanced Setup on the left side of the page. Then click on NAT.
   
4. On the main section of the page, select the correct User Interface (ex. PPPoE), Custom Server and type in Xbox Live. Then type in your static IP used on the Xbox 360 in to the Server IP Address. If you followed the previous steps, we used 192.168.1.115
   
   
   
5. Finally, enter the following values in to the table. Once finished, press Save/Apply at the bottom of the page.
   
6. Port Forwarding should now be set up in your Xbox 360 and Comtrend. You may need to wait a couple of minutes for the Comtrend to save the settings and take affect. If you are still getting the NAT Error, please call our Help Desk at 888-565-3200.

1. Visit the router's IP address
   To start, we must be on your computer. Then, open up your web browser (Internet Explorer, Firefox, Chrome, etc.) and clear out the address bar at the top. Now type in 192.168.1.1 and press Enter
   
2. Enter the Network password
   Next you should have a popup asking for a User Name and Password. Skip the username and the default password should be admin, unless you have manually changed the password, and then press OK.
   
   
   
3. Once logged in to the Linksys router, click on Applications & Gaming at the top and then Port Range Forward on the sub-menu
   
4. Enter the following information in the Port Range. Once completed, press Save Settings at the bottom of the page.
   
   
   
5. Port Forwarding should now be set up in your Xbox 360 and Linksys. You may need to wait a couple of minutes for the Linksys to save the settings and take affect. If you are still getting the NAT Error, please call our Help Desk at 888-565-3200.

Airport Extreme Xbox Live Cam

Resetting your AirPort base station restores it to a state that allows you to regain control of it when you lost the base station password or the base station isn't responding as expected. Sublime text 3 download windows 10. Depending on the base station model, you can perform one or more of these types of resets:

• Soft reset: Resets the base station password and disables security (Access Control and RADIUS settings) for 5 minutes so that you can join the network to make changes. If you make no changes within 5 minutes, the base station reverts to its former settings. Perform this reset if you can't administer the base station because you forgot its password.
• Hard reset: Resets the base station to an unconfigured state, but retains the last saved configuration and any profiles, allowing you to restore your base station from previous settings. Perform this reset when the base station is unresponsive, or you're troubleshooting network issues that aren't resolved by other means.
• Factory-default reset: Like a hard reset, but removes any saved configurations and profiles. Perform this reset if you're selling or giving away your base station. (This does not erase data stored on the built-in hard drive of a Time Capsule, or on any external hard drive connected to the base station.)

When performing a hard reset or factory-default reset:

• The base station is set to request an IP address by DHCP.
• The base station password is set to 'public.'
• The base station name is set to 'base station,' followed by the last six digits of the base station's MAC (Media Access Control) address.
• The base station network name is set to 'Apple Network,' followed by the last six digits of the base station's MAC address.
• The base station won't be visible in the Wi-Fi status menu or AirPort Utility for up to a minute. You may then use the device in its default state or reconfigure it using AirPort Utility.

Before resetting your base station, it's best to make sure that its firmware is up to date, if possible.

Reset 802.11ac or 802.11n models of AirPort base stations

Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip.

Soft reset:

1. Make sure that the base station is connected to power.
2. Press and hold the reset button for 1 second, then release the button. The status light on the base station flashes amber.
3. From the Wi-Fi status menu in the menu bar, choose the Wi-Fi network created by your base station.
4. Open AirPort Utility, which is in the Utilities folder of your Applications folder.
5. Click the icon for your base station in AirPort Utility, then click Edit from the pop-up menu. You can now change the password or reconfigure the base station as needed. When done, click Update.

Hard reset:

1. Make sure that the base station is connected to power.
2. Press and hold the reset button for about 5 seconds, until the status light on the base station flashes amber rapidly. Then release the button.
3. Wait about a minute for the base station to finish restarting.
4. Open AirPort Utility, which is in the Utilities folder of your Applications folder.
5. Click the Other Wi-Fi Devices button, then select your base station from the list. Click Edit.
6. Click the Other Options button.
7. Click 'Restore previous settings,' then click Next until you get to the final window.
8. When AirPort Utility indicates that setup is complete, click Done.

Airport Extreme Xbox Live Price

Factory-default reset, available only with firmware version 7.9.1 on AirPort Time Capsule 802.11ac and AirPort Extreme 802.11ac:

1. Disconnect the base station from power.
2. While holding down the reset button, connect the base station to power and continue to hold the reset button for about 6 seconds, until the status light on the base station flashes amber rapidly.
3. Wait about a minute for the base station to finish restarting. You can then use AirPort Utility to reconfigure the base station.

Reset 802.11b/g models of AirPort Extreme Base Station

Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip.

Soft reset

1. Make sure that the base station is connected to power.
2. Hold down the reset button for 10 seconds, then release the button.

Factory-default reset

1. Disconnect the base station from power.
2. While holding down the reset button, plug the base station into power and continue to hold the reset button for about 5 seconds, until you see the three status lights turn on. Then release the button.

Reset 802.11b models of Graphite or Snow (Dual Ethernet) AirPort Base Station

Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip. If you're using an AirPort Graphite or AirPort Snow (Dual Ethernet) base station, connect your computer directly to the base station using an Ethernet cable.

Soft reset (Mac OS X v10.6 or earlier)

1. Make sure that the base station is connected to power.
2. Hold down the reset button for 1 second. The middle LED will blink once every second while the device is in soft reset mode. The base station password is set to 'public' and the IP address is reset.
3. You can connect to the reset base station using the following manual network settings on your computer:
   • IP Address 192.42.249.15
   • Subnet 255.255.255.0
   • Router 192.42.249.13
4. From Wi-Fi status menu , choose the network created by the base station.
5. Open AirPort Admin Utility for Graphite and Snow 4.2.5 to reconfigure the base station.
   • IP address: Unless you've been given an IP address by your Internet service provider or system administrator, do not change the IP address.
   • Reset the base station password.
   • Turn encryption on to activate password protection for your network. If you turn on encryption, enter a new password for your network.
   • Make changes to passwords or any other settings you require, then click Update. The base station will use the new settings after it has restarted.

Factory-default reset (Mac OS X v10.5 or earlier)

1. Configure your computer's TCP settings to connect using Ethernet to:
   • IP Address 192.42.249.15
   • Subnet 255.255.255.0
   • Router 192.42.249.13
2. Disconnect the base station from power, then connect it again.
3. When all three status lights turn on, hold down the reset button for 30 seconds, until the middle AirPort base station status light turns on. If you're using a Graphite base station and the middle light is green, you pressed the reset button too late. Disconnect power and try again.
4. Open AirPort Admin Utility for Graphite and Snow 4.2.5 to reconfigure your base station and reinstall the base station software. The base station name will be set to the Ethernet ID of the base station, such as 00-50-E4-5B-8F-EA.